The apparatus consists of an EVAPORATING Flask rotated by non-sparking electric motor in heating water bath. The drive unit is clamped on V SHAPED heavy duty stand. The introduction tube permits continuous feed of the liquids into evaporating flask and also distillation under controlled atmosphere.The evaporating flasks is pear shaped to give a large surface area for evaporation, clamped to a glass duct which goes through the drive unit and produced into the condenser. The top condenser is fitted with B-19 joint through which introduction tube is inserted. The condenser spherical joint S-35 at the bottom of the condenser to receiver flasks cap; 1 Litre of Corning Glass with Ball point socket. The Condenser is Double Coil for Cooling Water and suitable for 220 volts, 50 cycles A/C Complete unit is fitted on 'V' shape Heavy Duty Stand with QUICK JACK ACTION

CAP. OF FLASK
(a) 1 litre
(b) 2 litre
(c) 3 litre
(d) 5 litre
(e) 10 litre

(A) Micro attachment for 1 litre cap. BUCHI APPARATUS

Water Bath: Double Wall, Thermostatically Controlled: (for above vacuum Rotary Evaporator)
Round Shape, Double Wall: Outer body made of Mild Steel finished in durable white stove enaml. Inside made of Stainless Steel. Thermostatically Control. Complete with wire and plug to work on 220 volts A/C